What is a temporary power pole used for?
A temporary power pole is a freestanding post with a meter socket and breaker panel that utility crews tie into before the site has permanent electrical infrastructure. Builders in Boynton Beach use them to run tools, lighting, and trailer HVAC on new construction, renovations, and events where the grid connection is not yet built out. Most jobs pair the pole with a light tower rental for night work and a mobile office trailer rental for the site super. If your project also needs sanitation, a portable toilet rental or construction dumpster rental usually goes in at the same time, since OSHA 1926.51(c) sets toilet counts by crew size on active sites. GFCI protection on temporary wiring falls under OSHA 1926.404(b)(1)(ii), which your electrician handles at hookup.
How does temporary power pole installation work?
Installation starts with a site visit to confirm the panel size, usually 100 amp or 200 amp, and where the utility wants the pole placed relative to the meter base and the property line. A licensed electrician sets the pole and panel; the utility company makes the final connection. Expect the pole itself to sit near the site entrance for easy access, similar to how a roll-off dumpster rental needs about 60 feet of straight clearance behind the delivery truck. Coordinate this early: pole scheduling, temporary fence rental placement, and storage container rental drop-off all compete for the same staging area on a tight urban lot. Boynton Beach sites near the Intracoastal often have narrower access, so confirm clearance before the truck arrives.
What are temporary power pole requirements for a construction site?
Requirements vary by project size, panel amperage, and utility company standards, and none of that is standardized citywide, so confirming amperage, grounding, and inspection steps with your electrical contractor and the utility before ordering the pole is the right call. A 200 amp temporary power pole is common for a mid-size commercial build with multiple trailers and power tools running at once; a smaller residential renovation may only need 100 amp service. This decision affects what else fits on site. A 4 stall restroom trailer or 8 stall restroom trailer with electric lighting draws off the same temporary service, so size the pole for your full site load, not just the tools. If you are also placing an ADA accessible porta potty, ADA Standards section 302.1 requires a stable, firm, slip-resistant surface underneath it, which affects where you can stage the pole and pad together.
Pricing for the pole itself depends on your electrician and utility fees, which sit outside what Boynton Beach Porta Pros quotes directly. For comparison, here is what our own equipment on the same job typically runs:
| unit | duration | typical price |
|---|---|---|
| standard porta potty | week | $200 |
| dumpster | week | $600 |
| fence | day | $50 |
| delivery fee | day | $150 |
Boynton Beach construction sites near Lake Worth Beach, about 7.6 miles north, and Palm Springs, about 9.8 miles north, follow the same utility coordination process. See our Porta Potty Rental in Boynton Beach, FL page for how we bundle sanitation with site setup, or check Service Areas in Boynton Beach, FL for coverage near Greenacres, 10.3 miles northwest.
How much does temporary power pole installation cost?
Cost depends on amperage, utility fees, and your electrician's rate, none of which Boynton Beach Porta Pros sets or quotes. Get pricing directly from a licensed electrical contractor and your utility provider. We can coordinate delivery timing around that install once you have a date.
Can I rent a temporary power pole from Boynton Beach Porta Pros?
No. We supply portable toilets, restroom trailers, dumpsters, fencing, and storage, not electrical poles. We do coordinate our deliveries around your electrician's schedule so the porta potty placement guide work happens without blocking pole access.
Do I need a permit for a temporary power pole?
Likely yes, but permit rules are not something we verify here. Confirm requirements with your city building department and utility before scheduling installation.
What size temporary power pole do I need?
It depends on your total electrical load. A single trailer with lights might need 100 amp service; multiple trailers, tools, and a crane usually need 200 amp. Ask your electrician to calculate the load before ordering.
Can a temporary power pole run my restroom trailer?
Yes, most restroom trailers, including a 2 stall restroom trailer or luxury restroom trailer, need standard voltage for lighting and pumps. Confirm the trailer's amp draw with us before your electrician sizes the pole.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.